Wrought Iron Australia Railings

Wrought Iron Australia Railings

Correctly preparing a surface before painting is always important, but it’s particularly vital when dealing with iron railings. Failing to properly clean before applying paint can cause bubbles and flaking due to underlying rust.

So when you start your project, begin by scrubbing the fence with a wire brush, which will remove the larger pieces of rust and flaking paint. Next, to remove the rest of the peeling paint, sand the railing with medium-grit sandpaper.

This also helps create a rough surface to which the paint can adhere more easily. Afterward, wrought iron australia sweep the area and wipe the railings down with soapy water.

After drying the metal off with a clean, dry rag, you can begin setting up tarps and dropcloths, and applying tape around the bottoms of the railing.

Now that your surface is ready, apply a rust-inhibitive primer, which comes in both liquid and aerosol form. After applying an even layer of the primer, let it dry for between one and three hours, or wrought iron australia whatever the directions indicate.

When choosing a paint color, try to keep your overall theme in mind. (Photo courtesy of Angie’s List members Michael and Margot Bowen of San Antonio)

Painting wrought iron australia

When the surface is completely dry, start applying exterior rust-inhibitive enamel paint. Again, these types of paints come in both liquid and aerosol form.

Aerosol paint makes the process go much faster, but is also messier and usually requires the use of more paint than liquid. If you’re working inside wrought iron australia, you may want to stick to liquid paint, but be sure to cover all the detailed work with a foam tip brush.

Whichever type of paint you use, try to refrain from laying on one thick coat of paint. Instead wrought iron australia, apply multiple lighter coats, which creates a more even finish and helps avoid bubbling and subsequent flaking.